IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) ALL CONTENT : Sediment management and morphodynamics : Biostabilization of fluvial sediments: an improved device to address an old problem
Biostabilization of fluvial sediments: an improved device to address an old problem
Author : THOM, MORITZ(1), SCHMIDT, HOLGER(1),WIEPRECHT, SILKE(1)& GERBERSDORF, SABINE U.(1)
ABSTRACT
In present studies the stability of sediments is predominantly described by means of gravitational forces of single particles or aggregates and physico-chemical interactions (like van der Waals, etc.). In contrast, adhesive forces caused by the presence of biofilm are less considered. This is despite the fact that they can influence the stability of sediments significantly (up to ten times as compared to abiotic sediments in recent experiments). Neglecting these stabilization mechanisms (called hereafter biostabilization) in river morphology can thus introduce large errors. However, these impacts are difficult to incorporate due to the absence of easy-to-apply methods that are capable of handling the high heterogeneities of biological growth on sediment surfaces.
In order to close this gap a method (MagPI: Magnetic Particle Induction) has been developed that determines the adhesiveness of a biofilm surface on the meso-scale (measuring surface: A = 0.25 cm2). Briefly, an electromagnet in combination with an adjustable power supply is used to attract ferromagnetic particles which have been spread on the measuring surface before. Then, the corresponding magnetic flux density (mTesla) for different thresholds is related to adhesiveness. Even though this method is already well-established and has been successfully applied in different studies, its full potential could not yet be utilized due to a lack of standardization.
In this paper a further development of the MagPI is presented, implementing a standardized measurement procedure by the synchronization of the power supply and a camera system. The attraction of particles is automatically evaluated with the help of image analysis such that additional parameters and mechanical properties of the biofilm are obtained to address the phenomenon of biostabilization in spatially and temporally high resolution.
In order to demonstrate the applicability of this method, representative results of long-term experiments (under defined environmental boundary conditions, at different seasons) are analyzed. A regression analysis, between results from erosional studies in a straight flume (SETEG) and the adhesion measurements, demonstrates a high applicability of the improved method with R2 = 0.84. The presented method marks a necessary contribution to the investigation of biostabilization in fluvial sediments and is a new way to address an old problem.
File Size : 521,648 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) ALL CONTENT
Article : Sediment management and morphodynamics
Date Published : 12/08/2015
Download Now