IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) ALL CONTENT : Special sessions : Pilot application of delft3d flexible mesh: assisting a field campaign at the sand engine
Pilot application of delft3d flexible mesh: assisting a field campaign at the sand engine
Author : ARJEN LUIJENDIJK(1,3), LISANNE BRAAT (2), NIEK WAAGMEESTER (3) & FREEK SCHEEL(4)
ABSTRACT
For the execution of field measurements around the Sand Engine during MegaPEX2014 there was a need for operational
model predictions. Local river outflow causes non-uniform velocities and spatially complex current patterns near the Sand
Engine. For assessing the optimal timing and location of the instruments and GPS drifters, information on the predicted
hydrodynamics was desired. A pilot application with the new Flexible Mesh version of Delft3D was therefore set up
focusing on 3D hydrodynamic operational forecasts for the area covering the Rhine river mouth and Sand Engine. One
single mesh was developed with flexible resolution in cell sizes in the areas of interest while covering all relevant (tideinfluenced)
areas, such as part of the river network, all port basins, Maasvlakte2 and large parts of the open sea. The
number of grid cells did not exceed 100,000 while a resolution of tenths of meters was obtained around the Sand Engine
and the river mouth area, which was virtually impossible to achieve using curvilinear grid methods. Comparisons of the
model results with observed water levels, velocities and salinities showed very satisfying results. First comparisons with XBand
radar images show a remarkable good reproduction of the fresh water plume passing the Sand Engine. Besides the
limited amount of grid cells, the flexible time step saved computational time as well.The present pilot application has
clearly shown the benefits of the Flexible Mesh approach in saving grid cells and enclosing complex geometries with
desired resolution in one single mesh, but more important it provides the ability to easily incorporate relevant large-scale
phenomena in your simulation that at some moments can dominate the local hydrodynamics.
File Size : 756,389 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) ALL CONTENT
Article : Special sessions
Date Published : 13/08/2015
Download Now