IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) ALL CONTENT : Sediment management and morphodynamics : Experimental study on bed deformation induced by a series of groins in submerged and non-submerged c...
Experimental study on bed deformation induced by a series of groins in submerged and non-submerged conditions
Author : Amini sola, Sahar;Tabatabai, M.R.M1;Kavianpour, M.R.M;Amini sola, Kamal;Amini sola, Saeedeh
Abstract
Now-a-days, with advances in science and technology and development of the river training techniques, various solutions have been developed for river protection, including installation of groins. Groins are installed at the riverbank with different angles to the bank. Since they intersect with the flow, the flow velocity increases and hence, a scour hole may establish in front of it, which may put the structure at failure risk. Therefore, the scouring pattern in front of the structure is of considerable importance. In this study, a series of groins in attractive, perpendicular and repulsive types (arrangements) were experimentally studied. Experimental study of the scour pattern in front of the groins was performed using a horizontal wide flume, 6m long, 1.6m wide and three different discharge values of Q=120lit/sec, 100lit/sec and 80lit/sec. The submerged ratio was 1.15 and the un-submerged ratios were 1 and 0.94. The bed of the Flume was filled with uniform fine aggregates (average diameter of 2.5mm) for a thickness of 20cm. The groins were arranged in three different relative distance (ratio of distance between groins S to groin length L) of S/L=1, 1.5 and 2, each with three installation angle of =45o, 90o and 135o. Therefore, the performance of the groins was investigated under 27 experiments. Flow depth and discharge were measured in the upstream, according to the submerged ratios and the scour dimensions were continuously monitored. After 2 hours, scour dimensions (width, depth, length) reached the equilibrium condition. Bed topography measurements were made at the end of each experiment after draining water from the flume. Bed deformation was observed only between the first two groins, however, no significant changes are observed in other parts of the bed. Maximum scour hole depth was occurred just downstream of the first groin. However, by increasing the groin distance, the bed changes are also decreased so that no bed changes may be noticeable adjacent to the third groin for longer distances between the last two groins. Finally, relations were developed for stable scour dimensions (depth, length and width) with Froude number of flow, relative distance and location of the groins.
File Size : 826,921 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) ALL CONTENT
Article : Sediment management and morphodynamics
Date Published : 18/08/2015
Download Now