IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) FULL PAPERS : THEME 3- SEDIMENT MANAGEMENT AND MORPHODYNAMICS : ?D NUMERICAL INVESTIGATION SEDIMENT TRANSPORT AND BED MORPHOLOGY AT RIVER CHANNEL CONFLUENCES
?D NUMERICAL INVESTIGATION SEDIMENT TRANSPORT AND BED MORPHOLOGY AT RIVER CHANNEL CONFLUENCES
Author : MOHAMMAD ROSTAMI(?) , EBRAHIM AMIRI TOKALDANI(?) & MARZIYE SARVARI(?)
Confluence is the hydraulic singularity where two or more channels (or rivers) converge in a single channel downstream. In fluvial networks, stream channel confluences produce significant changes in flow, sediment transport and water quality. Although over the last ?? years, the synergy between laboratory tests and field measurements has provided valuable information about the complex hydro-morpho-sedimentary processes acting in river confluence zones, but less numerical study as a cost-effective tool has been conducted in this area. The objective of the present paper is to investigate in detail the changes in the hydro-morpho-sedimentary processes occurring in confluence zone using a numerical model. A ?D CFD commercial model selected for this study solves Navier-Stocks equations with finite volume method. Selected turbulence model is RNG ?-e model and the bed-load transport model is based on Shields number. In the absence of field data, experimental data for channel confluence collected in the laboratory were used to verify the simulated results. Experiments were performed in a confluence flume where the main channel is ?.? m long and ?.?? m wide. A ?.? m long and ?.?? m wide tributary channel is connected at an angle of ???. Three discharge scenarios were tested. Numerical model was performed as the same geometry, flow and sediment data which used in experimental work. Satisfactory agreement was found between computed and measured flow pattern, bed load and bed elevation in the laboratory. The simulated bed profiles in the confluence zone compared well with the experimental data. The statistical analysis showed numerical model with an error of about less than ?? % might become a useful tool for predicting bed morphology changes including maximum depth and width of sediment deposit and maximum depth of bed erosion in river confluences.
File Size : 853,885 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) FULL PAPERS
Article : THEME 3- SEDIMENT MANAGEMENT AND MORPHODYNAMICS
Date Published : 18/04/2016
Download Now