IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) FULL PAPERS : THEME 4- WATER ENGINEERING : PRESSURE, VELOCITY AND BOUNDARY LAYER DISTRIBUTIONS ON AN EMBANKMENT WEIR
PRESSURE, VELOCITY AND BOUNDARY LAYER DISTRIBUTIONS ON AN EMBANKMENT WEIR
Author : STEFAN FELDER
Physical experiments were conducted on a large size embankment weir with upstream and downstream ramps of 1V:2H and 3 rounded corners for a range of flow conditions 0.042 = H/L < 0.321 corresponding to flow rates of 0.011 = Q = 0.226 m /s. The crest experiments highlighted non-hydrostatic pressures and a rapid redistribution of velocities at the upstream and downstream ends of the crest. At the downstream end negative pressures were observed for the largest flow rates indicating a risk of cavitation. Both velocity distributions and free-surface profiles showed some self-similarity. A turbulent boundary layer developed at the upstream crest edge and the growth of the boundary layer properties was in close agreement with the smooth turbulent boundary layer theory. The bed shear stresses were calculated on the crest and a close agreement of average dimensionless bed shear stresses were observed for the law of the wall and the momentum integral methods (t/(? g H) ? 0.0018). The dimensionless discharge coefficients of the present experiments were best correlated splitting the data into long- and broad-crested weirs. The present discharge coefficients were in close agreement with previous broad-crested weir studies with upstream rounded corners. The increase of the discharge capacity of a broad-crested weir is best achieved through the rounding of the upstream corner rather than the design with an upstream slope.
File Size : 1,003,161 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) FULL PAPERS
Article : THEME 4- WATER ENGINEERING
Date Published : 19/04/2016
Download Now