IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) FULL PAPERS : THEME 4- WATER ENGINEERING : OPTIMAL MOORING CONFIGURATION FOR TUNNEL ELEMENT DURING IMMERSION STANDBY
OPTIMAL MOORING CONFIGURATION FOR TUNNEL ELEMENT DURING IMMERSION STANDBY
Author : YUE SONG , GUOXING HUANG* , NINGCHUAN ZHANG , YUGUO PEI ) & YONGXUE WANG
In South China, the Hong Kong-Zhuhai-Macau Link is constructed to connect Hong Kong, Zhuhai and Macau. The traveling time from Hong Kong to Zhuhai or Macau will be reduced from 4.5 hours to approximately 40 minutes upon completion. This mega infrastructure consists of three kinds of section: a man-made island, a bridge section as well as a tunnel section crossing the offshore water of Ling Ding Yang, which is supposed to be the world longest and widest immersed tunnel after completed. The dimensions of the largest element are of 180 m in length, 11.4 m in height and 72,000 tons weight in air. All tunnel elements are to be constructed in nearby yards on shore, towed to the immersion location, and then moored on the sea surface above the trench on standby for immersion. During the standby stage, the tunnel-pontoons system may expose to harsh offshore wave and weather conditions, and the mooring lines might experience excessive tension or even breakage. Therefore, an experimental study was carried out on the hydrodynamic responses of tunnel element during immersion standby under waves and currents. Based on Froude number similarity, models of one tunnel element, two pontoons and the mooring system were constructed at a scale of 1:65. The tensions on the mooring lines with various angles were measured under pure wave and combined wave-current conditions with various wave heights and current velocities. After comparing the dynamic responses of the tunnel-pontoons system under various mooring configuration, the optimal mooring configuration of the tunnel-pontoons system was recommended for ensuring the safety of the tunnel element during immersion standby.
File Size : 652,698 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) FULL PAPERS
Article : THEME 4- WATER ENGINEERING
Date Published : 19/04/2016
Download Now