IAHR, founded in 1935, is a worldwide independent member-based organisation of engineers and water specialists working in fields related to the hydro-environmental sciences and their practical application. Activities range from river and maritime hydraulics to water resources development and eco-hydraulics, through to ice engineering, hydroinformatics, and hydraulic machinery.
Log On
About IAHRDirectoryCommitteesMy IAHRNews & JournalseLibraryeShopEventsJoin IAHRWorld CongressDonate
spacer.gif
spacer.gif eLibrary
spacer.gif eLibrary
You are here : eLibrary : IAHR World Congress Proceedings : 36th Congress - The Hague (2015) FULL PAPERS : THEME 4- WATER ENGINEERING : EVALUATION OF A DEPTH-AVERAGED NUMERICAL MODEL IN SIMULATION OF SIDE WEIR OVERFLOW VARIATIONS DUE TO...
EVALUATION OF A DEPTH-AVERAGED NUMERICAL MODEL IN SIMULATION OF SIDE WEIR OVERFLOW VARIATIONS DUE TO BED MORPHOLOGY CHANGES
Author : MOHAMMAD ROSTAMI
Side weirs, also known as a lateral weirs, and overflow dams are free overflow regulation and diversion devices commonly encountered in hydraulic engineering. They are set into the side of a channel or river allowing to spill a part of the discharge over their crest when the surface of the flow in the main-channel exceeds a certain level. The lateral loss of water is reducing the sediment transport capacity in the main-channel yielding to aggradation and the formation of a local sediment deposit in the downstream weir alignment. The reduced cross section generates backwater effects and additional contraction and expansion losses. As a consequence, the head over the side weir rises and the side overflow discharge as well. The design discharge to be diverted over the weir is increased by this flow-sediment transport interaction. Based on the systematic experimental flume study a two dimensional sediment transport model, CCHE2D, for the prediction of the mobile bed evolution near the side weir have been used. The Numerical model allows a simple and straightforward estimation of the interaction of a side overflow with bed-load transport and bed morphology in engineering practice. Regarding the impact of the deposit on the intensity of side overflow it has been found out that the spilled discharge might increase by a factor of up to 1.5 compared to fixed plane bed conditions. In this context about 25 % of the total increase are attributed to effects of form roughness and about 75 % to bed aggradation phenomena. In this regard the height of the deposit represents the most important parameter. Comparison between experimental data and numerical modeling showed to be in a good agreement
File Size : 666,147 bytes
File Type : Adobe Acrobat Document
Chapter : IAHR World Congress Proceedings
Category : 36th Congress - The Hague (2015) FULL PAPERS
Article : THEME 4- WATER ENGINEERING
Date Published : 19/04/2016
Download Now