DONATE

IAHR Document Library


« Back to Library Homepage « Proceedings of the 36th IAHR World Congress (Hague, 2015)

App Lication of Yalin and Da Silva&Apos; S Regime Channel Determination Method to the Middle Yangtze River

Author(s): Wenhong Dai; Zhifang Yan

Linked Author(s): Wenhong Dai

Keywords: Regime channel; Yalin and da Silva’s method; Evaluation; Middle Yangtze River

Abstract: Assessment of river regime state is of great significance for river flood control, river regulation, wharf construction etc. .Sarah (2000) had pointed out that in contrast to rational regime channel determination methods of Yang (1976) ,Chang (1979) ,White et al. (1981) ,etc. ,Yalin and da Silva’s method is the only rational method which, for a given fluid and granular material, requires specification of only the flow rate, Q, for the determination of regime channel geometry (regime width B R, regime depth h R, regime river bed slope S R) .In this paper, the effectiveness of Yalin and da Silva’s method is evaluated by using 323 sets of measured data of flumes and fields. The results show the rationality of the method. In order to assess the stability of the Middle Yangtze River, the calculated regime values by using Yalin and da Silva’s method versus the measured values of the key cross-sections are plotted in graphs with perfect agreement line. The results indicate that the measured channel widths are, in general, fairly close to the calculated regime ones, however, the calculated regime depth versus the measured depth points fall above the perfect agreement line while the calculated regime slope versus the measured slope points fall below the perfect agreement line. These mean that the river widths are nearly at their regime state, the river depths are smaller and the river bed slopes are much larger than the predicted regime ones, which also indicate that the invested river reach of the Middle Yangtze River has not reached its regime state yet.

DOI:

Year: 2015

Copyright © 2024 International Association for Hydro-Environment Engineering and Research. All rights reserved. | Terms and Conditions