| 39648 |
Validation of Mathematical Models for Predicting the Swirling Flow and the Vortex Rope in a Francis Turbine Operated at Partial Discharge |
P A Kuibin; V L Okulov; R F Susan-Resiga; S Muntean
|
2010 |
| 39649 |
Experimental Comparison of Cavitation Erosion Rates of Different Steels Used in Hydraulic Turbines |
L Ton-That
|
2010 |
| 39650 |
On the Upper Part Load Vortex Rope in Francis Turbine: Experimental Investigation |
C Nicolet; A Zobeiri; P Maruzewski; F Avellan
|
2010 |
| 39651 |
Modeling, Simulation, and Identification of the Servo Pumps |
C G Negoita; D Vasiliu; Ne Vasiliu; C Calinoiu
|
2010 |
| 39652 |
Modification of the Trailing Edges of the Large Stay Vanes and Their Influence on Dynamic Stresses |
A Gajic; P Manzalovic; Z Predic
|
2010 |
| 39653 |
A Swirl Generator Case Study for OpenFOAM |
O Petit; A I Bosioc; H Nilsson; S Muntean; R F Susan-Resiga
|
2010 |
| 39654 |
Yixing Pump Turbine Guide Vane Vibrations: Problem Resolution With Advanced CFD Analysis |
B Nennemann; E Parkinson
|
2010 |
| 39655 |
Parametric Design of a Francis Turbine Runner by Means of a Three-Dimensional Inverse Design Method |
K Daneshkah; M Zangeneh
|
2010 |
| 39656 |
High-Speed Flow Visualization in a Pump-Turbine Under Off-Design Operating Conditions |
V Hasmatuchi; S Roth; F Botero; F Avellan; M Farhat
|
2010 |
| 39657 |
Advanced Simulation of Hydroelectric Transient Process With Comsol/Simulink |
L Li; J D Yang
|
2010 |
